Skip to main content

How to make new xPack GNU texinfo releases

license GitHub issues GitHub pulls

This page is intended for those who maintain the xPack GNU texinfo project and documents how to make new releases.

Prerequisites​

The build scripts run on GNU/Linux and macOS.

For details on installing the prerequisites, please read the XBB prerequisites page.

Get project sources​

The project is hosted on GitHub:

To clone the stable branch (xpack), run the following commands in a terminal (on Windows use the Git Bash console):

rm -rf ~/Work/xpack-dev-tools/texinfo-xpack.git && \
git clone https://github.com/xpack-dev-tools/texinfo-xpack.git \
  ~/Work/xpack-dev-tools/texinfo-xpack.git

For development purposes, clone the xpack-development branch:

rm -rf ~/Work/xpack-dev-tools/texinfo-xpack.git && \
mkdir -p ~/Work/xpack-dev-tools && \
git clone \
  --branch xpack-development \
  https://github.com/xpack-dev-tools/texinfo-xpack.git \
  ~/Work/xpack-dev-tools/texinfo-xpack.git

Or, if the repo was already cloned:

git -C ~/Work/xpack-dev-tools/texinfo-xpack.git pull

Get the writable helper sources​

The project has a dependency to a common helper, that is normally installed as a read-only dependency; for development purposes, to be able to make changes to the scripts located inside the helper, clone the xpack-development branch and link it to the user global xPacks store:

rm -rf ~/Work/xpack-dev-tools/xbb-helper-xpack.git && \
mkdir -p ~/Work/xpack-dev-tools && \
git clone \
  --branch xpack-development \
  https://github.com/xpack-dev-tools/xbb-helper-xpack.git \
  ~/Work/xpack-dev-tools/xbb-helper-xpack.git && \
xpm link -C ~/Work/xpack-dev-tools/xbb-helper-xpack.git

Or, if the repo was already cloned:

git -C ~/Work/xpack-dev-tools/xbb-helper-xpack.git pull
xpm link -C ~/Work/xpack-dev-tools/xbb-helper-xpack.git

Other repositories in use are:

  • none

Release schedule​

This distribution generally follows the official GNU texinfo releases.

Prepare the new releases​

Before starting the build, perform some checks and tweaks.

Download the build scripts​

The build scripts are available in the build-assets/scripts folder of the xpack-dev-tools/texinfo-xpack Git repo.

To download them on a new machine, clone the xpack-development branch, as seen above.

Check Git​

In the xpack-dev-tools/texinfo-xpack Git repo:

  • switch to the xpack-development branch
  • pull new changes
  • if necessary, merge the website branch
caution

This is really important, otherwise the next steps will build again the previous release!

The xpack branch should be unchanged since the previous release and will be updated when the new release is out.

Update helper & other dependencies​

Check the latest versions at https://github.com/xpack-dev-tools/ and update the dependencies in build-assets/package.json.

Increase the version and update it in the top package.json​

  • determine the version (like 7.0.3-1)
  • update the version in top package.json
  • use the new version, suffixed by .pre, like 7.0.3-1.1.pre.

Update the customFields in build-assets/package.json (if necessary)​

If the project uses customFields in build-assets/package.json, update them.

Start the local web server​

Execute the npm script clean then start in the website sub-project, or run the following in a terminal:

(cd ~/Work/xpack-dev-tools/xbb-helper-xpack.git/website; npm run clean; npm run start)

Navigate to the Maintainer Info page, the Update the version specific code section.

Increase the version and update VERSION​

Determine the version (like 7.0.3-1) and update the build-assets/scripts/VERSION file; the format is 7.0.3-1. The fourth number is the xPack release number of this version. A fifth number will be added to the version in `package.json` when the package is published to the `npm` server.

Check the latest upstream release​

The latest releases must have been announced in GNU texinfo releases.

Compare the latest upstream release with the latest xPack release. If necessary, update the triplet, otherwise increase the fourth number, as below.

Update the customFields (if necessary)​

If the project uses customFields in build-assets/package.json

  • update the release specific properties (if any)
  • restart the local web server

Update the version specific code​

  • open the build-assets/scripts/versioning.sh file
  • add a new if with the new version before the existing code

Fix possible open issues​

Check GitHub issues and pull requests:

and fix them; assign them to a milestone (like 7.0.3-1).

Update CHANGELOG.md​

  • open the CHANGELOG.md file
  • check if all previous fixed issues are in
  • check the latest commits xpm run git-log; if necessary, copy/paste lines, group by dates and edit them using the below regular expressions
  • add a new entry like * v7.0.3-1 prepared
  • commit with a message like prepare v7.0.3-1

To turn the dates into headings, change from:



([0-9][0-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9]) [*]

to:



## $1

*

To remove the rest of the dates, change from:

^[0-9][0-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9] [*]

to:

*

Push the changes to the xpack-development branch​

Be sure that the latest commit that updates VERSION is pushed to the xpack-development branch!

caution

This is really important, otherwise the next steps will build again the previous release!

Run the development builds​

The builds currently run on 5 dedicated machines (x64 GNU/Linux, arm64 GNU/Linux, arm GNU/Linux, x64 macOS, arm64 macOS).

Before the real build, run test/development builds on all platforms.

Visual Studio Code extension​

All actions are defined as xPack actions and can be conveniently triggered via the VS Code graphical interface, using the xPack C/C++ Managed Build Tools extension.

Patches​

This project uses the upstream sources, without patches.

Restart the docker daemons​

If, for any reasons, the docker builds need to be canceled, it is very likely that some processes will continue to run in the background.

To completely terminate them, and ensure that docker runs from a clean slate, restart the docker daemons on all GNU/Linux machines:

sudo systemctl restart docker

Check if both projects are pushed​

Check if both the current project and the helper are on the xpack-development branch and the latest commits are pushed to GitHub.

Build the x64 macOS binaries​

For x64 macOS, first run the build on the development machine (wksi, a recent macOS):

export XBB_ENVIRONMENT_SKIP_CHECKS="y"
rm -f ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets/package-lock.json
git -C ~/Work/xpack-dev-tools/texinfo-xpack.git pull

xpm run install -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

git -C ~/Work/xpack-dev-tools/xbb-helper-xpack.git pull
xpm link -C ~/Work/xpack-dev-tools/xbb-helper-xpack.git

xpm run link-deps -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

xpm run deep-clean --config darwin-x64  -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm install --config darwin-x64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run build-development --config darwin-x64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

For a debug build:

xpm run build-development-debug --config darwin-x64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

The build takes several minutes to complete.

When functional, push the xpack-development branch to GitHub.

Run the native build on the production machine (xbbmi, an older macOS); start a VS Code remote session, or connect with a terminal:

caffeinate ssh xbbmi

To check the available space:

xpm run check-space -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

To free the space used by all previous builds of all xpack-dev-tools packages:

xpm run clear-all-project-builds -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

To update the build scripts and build the development binaries:

rm -f ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets/package-lock.json && \
git -C ~/Work/xpack-dev-tools/texinfo-xpack.git pull && \
xpm run install -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
git -C ~/Work/xpack-dev-tools/xbb-helper-xpack.git pull && \
xpm link -C ~/Work/xpack-dev-tools/xbb-helper-xpack.git && \
xpm run link-deps -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
\
xpm run deep-clean --config darwin-x64  -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm install --config darwin-x64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run build-development --config darwin-x64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

Several minutes later, the output of the build script is a compressed archive and its SHA signature, created in the buils-assets/build/darwin-x64/deploy folder:

  • xpack-texinfo-7.0.3-1-darwin-x64.tar.gz
  • xpack-texinfo-7.0.3-1-darwin-x64.tar.gz.sha

To update the build scripts and build the release binaries:

rm -f ~/Work/xpack-dev-tools/texinfo-xpack.git/package-lock.json && \
git -C ~/Work/xpack-dev-tools/texinfo-xpack.git pull && \
xpm run install -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
\
xpm run deep-clean --config darwin-x64  -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm install --config darwin-x64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run build --config darwin-x64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

Build the arm64 macOS binaries​

Run the native build on the production machine (xbbma, an older macOS); start a VS Code remote session, or connect with a terminal:

caffeinate ssh xbbma

To check the available space:

xpm run check-space -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

To free the space used by all previous builds of all xpack-dev-tools packages:

xpm run clear-all-project-builds -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

To update the build scripts and build the development binaries:

rm -f ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets/package-lock.json && \
git -C ~/Work/xpack-dev-tools/texinfo-xpack.git pull && \
xpm run install -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
git -C ~/Work/xpack-dev-tools/xbb-helper-xpack.git pull && \
xpm link -C ~/Work/xpack-dev-tools/xbb-helper-xpack.git && \
xpm run link-deps -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
\
xpm run deep-clean --config darwin-arm64  -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm install --config darwin-arm64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run build-development --config darwin-arm64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

Several minutes later, the output of the build script is a compressed archive and its SHA signature, created in the buils-assets/build/darwin-arm64/deploy folder:

  • xpack-texinfo-7.0.3-1-darwin-arm64.tar.gz
  • xpack-texinfo-7.0.3-1-darwin-arm64.tar.gz.sha

To update the build scripts and build the release binaries:

rm -f ~/Work/xpack-dev-tools/texinfo-xpack.git/package-lock.json && \
git -C ~/Work/xpack-dev-tools/texinfo-xpack.git pull && \
xpm run install -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
\
xpm run deep-clean --config darwin-arm64  -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm install --config darwin-arm64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run build --config darwin-arm64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

Build the x64 GNU/Linux binaries​

Run the docker build on the production machine (xbbli); start a VS Code remote session, or connect with a terminal:

caffeinate ssh xbbli

To check the available space:

xpm run check-space -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

To free the space used by all previous builds of all xpack-dev-tools packages:

xpm run clear-all-project-builds -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

To update the build scripts and build the development binaries:

rm -f ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets/package-lock.json && \
git -C ~/Work/xpack-dev-tools/texinfo-xpack.git pull && \
xpm run install -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
git -C ~/Work/xpack-dev-tools/xbb-helper-xpack.git pull && \
xpm link -C ~/Work/xpack-dev-tools/xbb-helper-xpack.git && \
xpm run link-deps -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
\
xpm run deep-clean --config linux-x64  -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run docker-prepare --config linux-x64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run docker-link-deps --config linux-x64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run docker-build-development --config linux-x64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

Several minutes later, the output of the build script is a compressed archive and its SHA signature, created in the buils-assets/build/linux-x64/deploy folder:

  • xpack-texinfo-7.0.3-1-linux-x64.tar.gz
  • xpack-texinfo-7.0.3-1-linux-x64.tar.gz.sha

To update the build scripts and build the release binaries:

rm -f ~/Work/xpack-dev-tools/texinfo-xpack.git/package-lock.json && \
git -C ~/Work/xpack-dev-tools/texinfo-xpack.git pull && \
xpm run install -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
\
xpm run deep-clean --config linux-x64  -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run docker-prepare --config linux-x64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run docker-build-development --config linux-x64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

Build the arm64 GNU/Linux binaries​

Run the docker build on the production machine (xbbla); start a VS Code remote session, or connect with a terminal:

caffeinate ssh xbbla

To check the available space:

xpm run check-space -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

To free the space used by all previous builds of all xpack-dev-tools packages:

xpm run clear-all-project-builds -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

To update the build scripts and build the development binaries:

rm -f ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets/package-lock.json && \
git -C ~/Work/xpack-dev-tools/texinfo-xpack.git pull && \
xpm run install -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
git -C ~/Work/xpack-dev-tools/xbb-helper-xpack.git pull && \
xpm link -C ~/Work/xpack-dev-tools/xbb-helper-xpack.git && \
xpm run link-deps -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
\
xpm run deep-clean --config linux-arm64  -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run docker-prepare --config linux-arm64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run docker-link-deps --config linux-arm64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run docker-build-development --config linux-arm64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

Several minutes later, the output of the build script is a compressed archive and its SHA signature, created in the buils-assets/build/linux-arm64/deploy folder:

  • xpack-texinfo-7.0.3-1-linux-arm64.tar.gz
  • xpack-texinfo-7.0.3-1-linux-arm64.tar.gz.sha

To update the build scripts and build the release binaries:

rm -f ~/Work/xpack-dev-tools/texinfo-xpack.git/package-lock.json && \
git -C ~/Work/xpack-dev-tools/texinfo-xpack.git pull && \
xpm run install -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
\
xpm run deep-clean --config linux-arm64  -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run docker-prepare --config linux-arm64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run docker-build-development --config linux-arm64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

Build the arm GNU/Linux (32-bit) binaries​

Run the docker build on the production machine (xbbla32); start a VS Code remote session, or connect with a terminal:

caffeinate ssh xbbla32

To check the available space:

xpm run check-space -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

To free the space used by all previous builds of all xpack-dev-tools packages:

xpm run clear-all-project-builds -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

To update the build scripts and build the development binaries:

rm -f ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets/package-lock.json && \
git -C ~/Work/xpack-dev-tools/texinfo-xpack.git pull && \
xpm run install -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
git -C ~/Work/xpack-dev-tools/xbb-helper-xpack.git pull && \
xpm link -C ~/Work/xpack-dev-tools/xbb-helper-xpack.git && \
xpm run link-deps -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
\
xpm run deep-clean --config linux-arm  -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run docker-prepare --config linux-arm -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run docker-link-deps --config linux-arm -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run docker-build-development --config linux-arm -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

Several minutes later, the output of the build script is a compressed archive and its SHA signature, created in the buils-assets/build/linux-arm/deploy folder:

  • xpack-texinfo-7.0.3-1-linux-arm.tar.gz
  • xpack-texinfo-7.0.3-1-linux-arm.tar.gz.sha

To update the build scripts and build the release binaries:

rm -f ~/Work/xpack-dev-tools/texinfo-xpack.git/package-lock.json && \
git -C ~/Work/xpack-dev-tools/texinfo-xpack.git pull && \
xpm run install -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
\
xpm run deep-clean --config linux-arm  -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run docker-prepare --config linux-arm -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets && \
xpm run docker-build-development --config linux-arm -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

Update the trees in the Install Guide page​

Copy the trees displayed at the end of the test builds and paste to Folder hierarchy section in the web file:

  • website/docs/install/_miscellaneous.mdx

If present, replace the actual version (like 7.0.3-1) with the following expression:

${customField('xpackVersion')}
tip

macOS does not have a tree command; either compile it from sources, or install it via HomeBrew, and make a link to /usr/local/bin.

Copy/paste the full list of links displayed at the end of the build, in sequence, for each platform (GNU/Linux, macOS), and check the differences compared to the repository.

Commit if necessary.

Update the durations of the development builds​

In website/docs/maintainer/_development-durations.mdx, update the durations of the builds.

Commit if necessary.

How to build a debug version​

In some cases it is necessary to run a debug session with the binaries.

For these cases, the build script accepts the --debug options.

There are also xPack actions that use this option (build-development-debug and docker-build-development-debug).

Files cache​

The XBB build scripts use a local cache such that files are downloaded only during the first run, later runs being able to use the cached files.

However, occasionally some servers may not be available, and the builds may fail.

The workaround is to manually download the files from alternate locations (like https://github.com/xpack-dev-tools/files-cache/tree/master/libs), place them in the XBB cache (Work/cache) and restart the build.

Run the production builds​

The automation is provided by GitHub Actions and three self-hosted runners.

Start the self-hosted runners​

  • on the development machine (wksi) open ssh sessions to the build machines (xbbli, xbbla, xbbla32, xbbmi, xbbma):
caffeinate ssh xbbli
caffeinate ssh xbbla
caffeinate ssh xbbla32
caffeinate ssh xbbmi
caffeinate ssh xbbma

Create a screen session, to provide a persistent standard output for the runners:

screen -S ga

To quit it, use # Ctrl-a Ctrl-d.

For xbbli & xbbla, which have more memory, start two runners:

~/actions-runners/xpack-dev-tools/1/run.sh &
~/actions-runners/xpack-dev-tools/2/run.sh &

On all other machines start a single runner:

~/actions-runners/xpack-dev-tools/run.sh &

To check the status of the runners locally:

ps -a | grep 'Runner.Listener'

To kill them:

killall Runner.Listener

Check the status of the runners​

The status of all self-hosted runners is available at the GitHub Runners page.

Publish the helper​

Publish a new release of the helper on npmjs.

Update the dependency to the new helper​

In build-assets/package.json, update the reference to "@xpack-dev-tools/xbb-helper": (possibly in all xPack projects).

Commit the changes to build-assets/package.json​

Use the message build-assets/package.json: bump deps.

Check for disk space​

Check if the build machines have enough free space and eventually do some cleanups:

xpm run check-space -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

This is equivalent to running a df command.

df -gH /

To free the space used by all previous builds of all xpack-dev-tools packages:

xpm run clear-all-project-builds -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

This is equivalent to running a wide rm to remove the build folders:

rm -rf ~/Work/xpack-dev-tools/*/build-assets/build

Generate the GitHub workflows​

Run the generate-workflows xPack action to update the GitHub workflow files.

xpm run generate-workflows -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

Commit and push​

  • commit with the message Re-generate workflows
  • push the xpack-development branch to GitHub

Manually trigger the build GitHub Actions​

To trigger the GitHub Actions builds, use the xPack actions:

  • trigger-workflow-build-darwin-x64
  • trigger-workflow-build-darwin-arm64
  • trigger-workflow-build-linux-x64
  • trigger-workflow-build-linux-arm64
  • trigger-workflow-build-linux-arm
xpm run trigger-workflow-build-darwin-x64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets
xpm run trigger-workflow-build-darwin-arm64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets
xpm run trigger-workflow-build-linux-x64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets
xpm run trigger-workflow-build-linux-arm64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets
xpm run trigger-workflow-build-linux-arm -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

The scripts behind these actions require the GITHUB_API_DISPATCH_TOKEN variable to be present in the environment, and the organization PUBLISH_TOKEN to be visible in the Settings → Action → Secrets page.

These commands use the xpack-development branch of this repo.

Durations & resulting binaries​

The builds take about 6 minutes to complete:

  • darwin-x64: 3m (nuc)
  • darwin-arm64: 3m (m1)
  • linux-x64: 3m (amd)
  • linux-arm64: 6m (rpi4)
  • linux-arm: 5m (rpi4)

The workflow results and logs are available from the GitHub Actions page.

Update the values in website/docs/maintainer/_github-actions-durations.mdx with those shown by GitHub Actions.

The resulting binaries are available for testing from pre-releases/test.

Run the tests​

Automated tests​

The automation is provided by GitHub Actions.

To trigger the GitHub Actions tests, run the xPack actions:

  • trigger-workflow-test-prime
  • trigger-workflow-test-docker-linux-x64
  • trigger-workflow-test-docker-linux-arm
xpm run trigger-workflow-test-prime -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets
xpm run trigger-workflow-test-docker-linux-x64 -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets
xpm run trigger-workflow-test-docker-linux-arm -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

The scripts behind these accesible require the GITHUB_API_DISPATCH_TOKEN variable to be present in the environment.

These actions use the xpack-development branch of this repo and the pre-releases/test binaries.

The tests results are available from the GitHub Actions page.

After running the prime tests, download the test results and compare with previous runs.

More macOS tests​

Since GitHub Actions provides a limited range of versions for the macOS runner, the multi-version macOS tests run on Travis.

To trigger the Travis test, run the trigger-travis-macos xPack action:

xpm run trigger-travis-macos -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

This script requires the TRAVIS_COM_TOKEN variable to be present in the environment.

The test results are available from Travis CI.

Manual tests​

To download the pre-released archive for the specific platform and run the tests, use:

git -C ~/Work/xpack-dev-tools/texinfo-xpack.git pull
xpm run install -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets
xpm run test-pre-release -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

For even more tests, on each platform, download the archive from pre-releases/test and check the binaries.

On macOS, remove the com.apple.quarantine flag:

xattr -cr ${HOME}/Downloads/xpack-*

Publish the release​

Create a new GitHub pre-release​

  • in CHANGELOG.md, add the release date and a message like * v7.0.3-1 released
  • commit with CHANGELOG update
  • check and possibly update the build-assets/templates/body-github-release-liquid.mdx
  • push the xpack-development branch to GitHub
  • run the trigger-workflow-publish-release xPack action:
xpm run trigger-workflow-publish-release -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

The workflow result and logs are available from the GitHub Actions page.

The result is a draft pre-release tagged like v7.0.3-1 (mind the dash in the middle!) and named like xPack GNU texinfo v7.0.3-1 (mind the dash), with all binaries attached.

  • edit the draft and be sure it is attached to the xpack-development branch (important!)
  • perform the final edits (maintenance vs. new release) and check if everything is fine
  • keep the pre-release button enabled
  • do not enable Discussions yet
  • click the Publish release button

Note: at this moment the system should send a notification to all clients watching this project.

Prepare a new blog post​

  • check and possibly update the website/blog/_templates/blog-post-release-part-[12]-liquid.md
  • run the generate-website-blog-post xPack action; this will add a file in the website/blog folder:
xpm run generate-website-blog-post -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets
  • edit the front matter properties
  • select the correct summary
  • commit with blog post release 7.0.3-1 published

Update the web install page​

  • check and possibly update the output of the --version runs in
    • website/docs/install/_automatic-install-quick-test.mdx
    • website/docs/install/_manual-install-quick-test.mdx
  • commit changes
  • open the package.json file
  • check if the links in the bin property cover the actual binaries
  • if necessary, also check on Windows

Update the package.json list of binaries​

  • select the xpack-development branch
  • be sure that the binaries were attached to the pre-release
  • run the update-package-binaries xPack action:
xpm run update-package-binaries -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets
  • open the top package.json file
  • check the baseUrl: it should match the file URLs (including the tag/version); no terminating / is required
  • from the release, check the SHA & file names
  • compare the SHA sums with those shown by cat *.sha
  • check the executable names
  • commit all changes, use a message like package.json: update urls for 7.0.3-1.1 release

Publish on the npmjs.com server​

  • select the xpack-development branch
  • check the latest commits xpm run git-log
  • update CHANGELOG.md, add a line like * v7.0.3-1 published on npmjs.com
  • commit with a message like CHANGELOG: publish npm v7.0.3-1.1
  • npm pack and check the content of the archive, which should list only the package.json, the README.md, LICENSE and CHANGELOG.md; possibly adjust .npmignore
  • configure the version; the first 4 numbers are the same as the GitHub release; the fifth number is the npm specific version:
npm version 7.0.3-1.1
  • the commits and the tag should have been pushed by the postversion script; if not, push them with git push origin --tags to GitHub
  • publish and add the test tag:
npm publish --tag test
  • when publishing for the first time, use:
npm publish --access public

After a few moments the version will be visible at npmjs.com.

Test if the binaries can be installed with xpm​

Run the trigger-workflow-test-xpm xPack action:

xpm run trigger-workflow-test-xpm -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

This will install the package via xpm install on all supported platforms.

The tests results are available from the GitHub Actions page.

Tag the npm package as latest​

When the release is considered stable, promote it as latest:

npm dist-tag ls @xpack-dev-tools/texinfo
npm dist-tag add @xpack-dev-tools/texinfo@7.0.3-1.1 latest
npm dist-tag ls @xpack-dev-tools/texinfo

In case the release proves problematic and needs to be unpublished:

npm unpublish @xpack-dev-tools/texinfo@7.0.3-1.1

Build the static website locally​

Validate the web site content in a local build via the npm build script:

npm --prefix website run build

Publish the website​

  • merge xpack-development into website
  • push the website branch to GitHub

At this moment an automated GitHub Action will generate and publish the website.

The website branch may be subsequently updated, as long as the version in package.json is not changed.

Update the xpack branch​

  • merge xpack-development into xpack
  • push the xpack branch to GitHub
note

Avoid further updates to the xpack branch until the next release.

Create the final GitHub release​

  • go to the GitHub Releases page
  • check the download counter, it should match the number of tests
  • add a link to the Web blog [Continue reading »](); use an same blog URL
  • remove the tests only notice
  • disable the pre-release button
  • click the Update Release button

Check SourceForge mirror​

Cleanups​

Remove the pre-release binaries​

Clean the work area​

Run the trigger-workflow-deep-clean xPack action

xpm run trigger-workflow-deep-clean -C ~/Work/xpack-dev-tools/texinfo-xpack.git/build-assets

This will remove the build folders on all self-hosted runners.

The results are available from the GitHub Actions page.

Share on Twitter​

  • in a separate browser windows, open X/Twitter
  • using the @xpack_project account
  • paste the release name like xPack GNU texinfo v7.0.3-1 released
  • paste the link to the blog post release
  • click the Tweet button

Analytics​

Credit to Shields IO for the badges and to Somsubhra/github-release-stats for the individual file counters.